How to Turn on Screen Mirroring on Samsung Galaxy S6 Edge + and Connect With SmartTV

Following are the instruction on how to Turn on Screen Mirroring on Samsung Galaxy S6 Edge + and Connect With SmartTV, i’ll be using different methods to connect Samsung Galaxy S6 Edge + with SmartTV. You’ll be needing AllShare Cast Wireless Hub, HomeSync and HDMI CableAlso i will tell you how to use SideSync to connect your Samsung Galaxy S6 Edge + with PC or SmartTV.

fix s6 not registered on network

How To Enable screen mirroring on Samsung Galaxy S6 Edge +:

  • Goto quick setting.
  • Tap on Screen mirroring icon and enable it.

Now in the following steps you’ll find out how you can enable screen mirroring with AllShare Cast Wireless Hub, HomeSync, Miracast and HDMI Cable.

How To share the screen and data between your PC and mobile device:

  • First of all download SideSync on your Windows/Mac and mobile device. You can download SideSync from Google Play on your device.
  • Once SideSync is installed on your PC and mobile device, connect your device with PC using USB cable or WiFi.
  • If you have Samsung Smart TV then you can connect your device using WiFi, but if you don’t have Samsung SmatTV then you have buy a AllShare cast hub in order to connect with TV.

How to screen mirror from Samsung Galaxy S6 Edge + to a TV using AllShare Cast:

  • Turn on your television.
  • Power on your AllShare Cast though charger.
  • Connect your TV with AllShare Cast with HDMI Cable.
  • Kindly properly put HDMI Cable in the right port.
  • Now wait for the light to get blue from red on your AllShare Cast device.
  • Your TV is connected with AllShare Cast.
  • Now go to Samsung Galaxy S6 Edge + quick setting and tap on screen mirroring and first turn off then turn on it again.
  • After turning on Screen mirroring you will get a list of available devices. Select AllShare Cast’s dongle and enter the PIN as showed on TV.
  • Your Samsung Galaxy S6 Edge + is connected with your TV through AllShare Cast.

How to screen mirror from Samsung Galaxy S6 Edge + to a Samsung Smart TV:

  1. Press Input from your Samsung SmartTV remote.
  2. Select Screen Mirroring from your Smart Tv screen.
  3. Now go to your Galaxy S6 Edge + quick setting tap on Screen Mirroring.
  4. Your Phone will list all the available device available for Screen Mirroring.
  5. Select Samsung Smart TV. That’s all.

How to Turn on Screen Mirroring on Samsung Galaxy S6 Edge and Connect With SmartTV

When Samsung Galaxy S5 was released i posted about How to Turn on Screen Mirroring on Samsung Galaxy S5 and Connect With SmartTV. Now Samsung Galaxy S6 Edge is out so today i’ll tell you how to Turn on Screen Mirroring on Samsung Galaxy S6 Edge. The method totally same because Samsung didn’t changed anything related to screen Mirroring. I’ll be using AllShare Cast Wireless Hub, HomeSync and HDMI Cable.

galaxy-s6-edge-black

How To Enable screen mirroring on Samsung Galaxy S6 Edge:

  • Goto quick setting.
  • Tap on Screen mirroring icon and enable it.

Now in the following steps you’ll find out how you can enable screen mirroring with AllShare Cast Wireless Hub, HomeSync, Miracast and HDMI Cable.

How to screen mirror from Samsung Galaxy S6 Edge to a TV using AllShare Cast:

  • Turn on your television.
  • Power on your AllShare Cast though charger.
  • Connect your TV with AllShare Cast with HDMI Cable.
  • Kindly properly put HDMI Cable in the right port.
  • Now wait for the light to get blue from red on your AllShare Cast device.
  • Your TV is connected with AllShare Cast.
  • Now go to Samsung Galaxy S6 Edge quick setting and tap on screen mirroring and first turn off then turn on it again.
  • After turning on Screen mirroring you will get a list of available devices. Select AllShare Cast’s dongle and enter the PIN as showed on TV.
  • Your Samsung Galaxy S6 Edge is connected with your TV through AllShare Cast.

How to screen mirror from Samsung Galaxy S6 Edge to a Samsung Smart TV:

  1. Press Input from your Samsung SmartTV remote.
  2. Select Screen Mirroring from your Smart Tv screen.
  3. Now go to your Galaxy S6 Edge quick setting tap on Screen Mirroring.
  4. Your Phone will list all the available device available for Screen Mirroring.
  5. Select Samsung Smart TV. That’s all.

How To Enable USB Debugging on Samsung Galaxy S6 [ Guide ]

Last day i posted about how to Turn on Screen Mirroring on Samsung Galaxy S6, today i’ll tell you how to enable USB debugging on Samsung Galaxy S6. Most of you know how to enable USB debugging on Android, but for those who are new to Android and new to Samsung Galaxy devices they can learn How To Enable USB Debugging on Samsung Galaxy S6 from the following guide.

galaxy-s6-edge-black

How To Enable USB Debugging on Samsung Galaxy S6 [ Guide ]:

  • Goto Main menu and launch quick settings.
  • Now go to About Device Menu.
  • Now go to Build Number.
  • Then tap on the build number 7 times.
  • After the 7th tap you’ll get the message that now you are a developer.
  • Now press back button, now you shall see Developer option.
  • Go to developer menu and enable USB Debugging.

Now that USB Debugging option is enable I hope that you don’t have any issue connecting through USB on PC and if any problem still exist please make sure that you are using original USB cable of Samsung Galaxy S6.

How to Turn on Screen Mirroring on Samsung Galaxy S6 and Connect With SmartTV

When Samsung Galaxy S5 was released i posted about How to Turn on Screen Mirroring on Samsung Galaxy S5 and Connect With SmartTV. Now Samsung Galaxy S6 is out so today i’ll tell you how to Turn on Screen Mirroring on Samsung Galaxy S6. The method totally same because Samsung didn’t changed anything related to screen Mirroring. I’ll be using AllShare Cast Wireless Hub, HomeSync and HDMI Cable.

galaxy-s6-edge-black

How To Enable screen mirroring on Samsung Galaxy S6:

  • Goto quick setting.
  • Tap on Screen mirroring icon and enable it.

Now in the following steps you’ll find out how you can enable screen mirroring with AllShare Cast Wireless Hub, HomeSync, Miracast and HDMI Cable.

How to screen mirror from Samsung Galaxy S6 to a TV using AllShare Cast:

  • Turn on your television.
  • Power on your AllShare Cast though charger.
  • Connect your TV with AllShare Cast with HDMI Cable.
  • Kindly properly put HDMI Cable in the right port.
  • Now wait for the light to get blue from red on your AllShare Cast device.
  • Your TV is connected with AllShare Cast.
  • Now go to Samsung Galaxy s6 quick setting and tap on screen mirroring and first turn off then turn on it again.
  • After turning on Screen mirroring you will get a list of available devices. Select AllShare Cast’s dongle and enter the PIN as showed on TV.
  • Your Samsung Galaxy S6 is connected with your TV through AllShare Cast.

How to screen mirror from Samsung Galaxy S6 to a Samsung Smart TV:

  1. Press Input from your Samsung SmartTV remote.
  2. Select Screen Mirroring from your Smart Tv screen.
  3. Now go to your Galaxy S6 quick setting tap on Screen Mirroring.
  4. Your Phone will list all the available device available for Screen Mirroring.
  5. Select Samsung Smart TV. That’s all.

iPhone Camera App Freeze on Start, Here is How to fix it

No matter how much of a perfection every OEM wants to achieve, it just can’t because, with every update there are new features ported in the OS, within those new features there are new problems and new bugs, to solve them further updates come and this cycle keeps on going on and on. Apple is doing their best to provide users with a Perfect OS, but somehow they are also failing, cause sometimes, installing a third party tweak or messing under the hood of your device causes some apps to crash or they just won’t operate even a little. The same thing has been happening with the Stock Camera app of, as users have reported that when they open the app it freeze on the Start and they are forced to minimize and close the app.

The reason can be anything when it comes to such problem, sometimes there is a technical glitch, sometimes you are required to update the app or System, whatever the case could be, there are some possible ways to fix this problem. Even if you are facing a wrong orientation picture after taking it, that problem can also be solved. Without further ado, let us continue towards the solutions.

iPhone Camera App Freeze on Start, Here is How to fix it

Fix Camera App Freeze Problem:

Update your Device Software:

The very first thing you should be looking for is the whether there is an update available or not.

  1. Go to Settings.
  2. Navigate to General
  3. Tap Software update.
  4. Or just connect your device with PC.
  5. Open iTunes.
  6. You’ll be prompted to update your device, if available
  7. Update and the problem will be solved

Reset your device:

This might be a success, as many users claimed to call it a successful process, although it will make some minor changes to your device, but everything will be safe.

  1. Open Settings
  2. Tap on General
  3. Tap on Reset.
  4. Tap Reset All Settings

Restore your Device: (Final Resort)

  1. Connect your device with PC.
  2. Launch iTunes
  3. Select your Phone from Menu
  4. Click Restore your iPhone.
  5. That is it

But Remember Restoring your iDevice will cause you to loose all your data, so make a back-up before doing this

Record FaceTime Calls on Mac OS X Yosemite – How to

Lets face it, Mac OS X along with iOS has alot of restrictions when it comes to sharing, even if you have to share screen of your iDevice on Mac or if you have to Record Screen of your iDevice on Mac. In past we have to rely on 3rd party apps to do such stuff, with the arrival of iOS 8, alot has changed as Apple has given alot of opportunities to do alot of custom things without the need of any 3rd party app. Now with the hep of iOS 8 and Mac OS X Yosemite, any user can easily Record iPhone screen using the OS X Yosemite and we will show you How to do it.

Among the plethora of communication apps like Skype, Facebook Video call, still Apple users are stuck with the FaceTime, the default Video Calling app in Mac OS X and iOS. In my opinion, default and Stock apps are better, cause they have more support and Apple support is precisely for Stock apps and stuff. FaceTime like any other Social Network, doesn’t allows you to see your calls once you send them, in such cases users always need a way to record some important calls and show them, in case of any emergency, afterwards.

Record FaceTime Calls on Mac OS X Yosemite - How to

Record FaceTime Calls on Mac OS X Yosemite:

  1. Make sure your Mac is running OS X Yosemite.
  2. Make Sure your iDevice is running iOS 8 or above
  3. Connect your iDevice with Mac.
  4. Launch QuickTime
  5. In QuickTime, Navigate to File > New Movie Recording.
  6. Along-Side the Red Button, click the Drop Down.
  7. Select your iPhone as Camera and Microphone Source.
  8. Now as soon as you receive a Call, Click the Record button before accepting the call.
  9. Once you are done, click the Record button again to stop the recording
  10. Enjoy

How to Download Facebook Videos on iPhone

On Android one can do lot of basic things like downloading, simply cause it does have a default Download manager, something that can’t be seen in iOS at all. One has to either send an E-Mail or use WhatsApp if you want to share a video with anyone else, especially when it comes to Offline play. While you Click on a Video using Android it simply gives you an option to download it, while iOS just opens it in the Video Player.

While on the other hand, Mailed video can’t be seen in any Gallery or Video Player it can be opened by visiting the Mail again and again, even if you are offline.But that is not our concern here, we are here to show you How you can download videos from Facebook while using an iPhone. All you need is a simple Download manager and make sure you don’t open Facebook in the App, instead in the Downloader itself, without further ado, let us continue.

Screenshot_3

Downloads Required:

Video Downloader Plus

How to Download Facebook Videos on iPhone:

  1. Download and Install the app.
  2. Open it and Log-in using your account.
  3. Once logged-in, you’ll browse like you normally do.
  4. But while watching a video, just tap and Hold on it.
  5. Tap Download and Tap the “Add to Camera Roll”
  6. That is all, once the whole Video is downlaoded, you can visit your camera Roll again and again to watch it Offline
  7. Or you can just Visit the Video Player to watch it, whatever you choose,now you can watch Facebook videos offline on your iPhone.
  8. Enjoy!

Also See:How to Share Files Between Android and iPhone

 

Root Nexus 4 on Android 5.0 Lollipop using CF-Auto Root

Android 5.0 Lollipop Factory Images are available for the whole Nexus line, the Nexus devices released in 2012 and afterwards, along with that Chainfire was busy rooting all the Nexus devices running Android 5.0 Lollipop, although it was a little disappointment to see that Nexus 4 and Nexus 7 2102 users have to wait for 2 more days to get the Official Images of Android 5.0 Lollipop, but Chainfire is not doing the same thing, he has been releasing the rooting method for all Lollipop updated Nexus devices using a tool of its own, CF-Auto Root Tool. This Root Tool is far better than a lot of rooting tools and even better than the CF-Auto Root itself, with this tool your device is rooted with just one click, no need to go through complex steps to root your device again.

Furthermore, the root tool is available exclusively for all the Nexus devices, this root tool uses the fastboot commands and do everything in front of you while you just press a key and wait. It doesn’t matter whether your device has locked Bootloader or Un-locked Bootloader, this root tool will work on both devices, but the thing is that it will unlock the bootloader, which unfortunately erases all of your data. For a typical Android user, everything is simple and quick, but for a new user the process might be a little tricky, but don’t you worry, we got your back as we will provide you the whole process. Let’s go through the Preparations and get ready to root your device.

Root Nexus 4 on Android 5.0 Lollipop using CF-Auto Root

Early Preparations:

1. This is only for Nexus 4!

This custom ROM is only for the device mentioned above. Make sure that your model number matches the one listed above. To do so, go to Settings > About Device on your device and see your model number. Flashing this ROM on any other device will result in bricking it so make sure that you meet this requirement first of all.

2. Battery should be charged at least over 60%

Make sure that your battery is charged enough to complete the flashing process. In case your battery is low and your device goes dead during the flashing process, you may end up soft bricking your device as it won’t complete the flashing process.

3. Backup everything!

Just to be on the safe side, you may consider backing up each and everything from your Android device. This is highly recommended so that in case anything goes wrong, you still have the access to all of your data and you can restore it immediately. You may backup everything as listed below.

4. Update your device to Android 5.0 Lollipop!

Since this rooting method ia only for Android 5.0 Lollipop, you’ll need to update your device to Android 5.0 Lollipop, follow the link to do so: Link

5. Disclaimer

The methods involved in flashing custom recoveries, roms and rooting your phone are highly custom and may result in bricking your device, and has nothing to do with Google or the device manufacturer that is Google in our case. Also rooting your device will void its warranty and you will be no longer eligible for any kind of free device services by the manufacturers/warranty providers. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

Downloads Required:

CF-Auto One Click Tool: Link

How To Root Nexus 4:

Screenshot_10

  1. Open your device Settings.
  2. Navigate to Developer Options
  3. Tick the OEM Unlock.
  4. Now Reboot your device to Bootloader mode.
  5. Connect your device with PC and Make sure it is detected.
  6. Now Simply Launch the Script based on your OS, for Windows, launch: root-windows.bat
  7. Follow on-Screen Instructions.
  8. That is it, sit back and relax while it is all done for you

How To Fix SD Card Write On T-Mobile Galaxy Note 4 After Rooting

Previously we posted an Article of How To Root T-Mobile Galaxy Note 4, however, everything has a consequence,despite that rooting open a lot of opportunities for you, still there are a lot of dangers in it. In this case of T-Mobile Galaxy Note 4, the person who actually posted the Rooting method of T-Mobile Galaxy Note 4, TEKHD, of XDA developers, also mentioned that after rooting this device, you are sure to encounter this SD Card problem. Now the Problem is something like this, after the successful reboot and rooting your device, when you are going to write anything on your SD Card, by that means, external SD Card, you won’t be able to succeed. However, the good news is that there is a solution, a temporary one though, but it wil work.

sdfix

Developer also mentioned, that they are trying to make a Flashable zip file for this problem as the TWRP recovery for T-Mobile Note 4 is also available, but that solution has to take a while, till then follow the steps below, and solve your problem. Now remember, even if you are having such issues on a non-rooted device, you need to root your device to solve it, because we are going to make some chnages in the Root of your device, which requires a Root Explorer, thus requires a rooted device. Without further ado, let us begin.

How To Fix SD Card Write:

  1. First of all Root your Galaxy Note 4, Follow the link to do so.
  2. Now Download and Install Root Explorer/Root Browser.
  3. Once installed, Open it and Navigate to etc/permissions/platform.xml.
  4. Open it and Add the Line: 
  5. Make the Changes Show in Picture Above(Courtsy: TEKHD)
  6. Now Save the File and Reboot the device.
  7. That’s it, though it is a temporary solution, but you need it

Print SMS and WhatsApp Messages on Android – How To

Well I don’t think that there will be any need of that, but still there are sometimes, when you need a Hard Copy back-up of your Text Messages. Especially if you use your Mobile phone for Business conversations. E-Mail prints are pretty easy to take, but everyone knows that and some 3rd party people won’t be sending you messages over the E-Mail and after the ease provided by the WhatsApp and Mobile Network connectivity, I don’t think that people talk over the mail now a days, they prefer to use Whatsapp or Default Messaging app.

However, you never know when you might need something like this, better safe than sorry. So, we have prepared a Guide on How To Print Txt Messages or WhatsApp messages on Android OS. The work around is not something difficult, all you need is an app and an active internet connection and you are good to do, so without any further ado, let’s get started.

SMS-Backup-3

How To Print Text Messages:

By Default there isn’t any option to do something like this, but if you can’t do something like this in Android, then this world is over. There are a couple of apps available, that will take part in this process, we are going to use SMSBackup + App. It is totally simple and free to use. The basic idea is to transfer all your messages to G-Mail account and Print it from the Official G-mail app or from PC.

  1. Download and Install SMSBackup +.
  2. Once installed open it.
  3. Grant the app access over the G-Mail account.
  4. Once done, just press the Back-Up button.
  5. The app will back-up all your messages to your G-Mail account.
  6. By Default all your messages will be stored under the SMS label and Mark as read.
  7. The Conversation chain will be shown as an E-Mil chain and that is what we are use to Print
  8. Now From PC, Log-in to your G-Mail account.
  9. Navigate to SMS label to find all the Back-up messages.
  10. Click on the Conversation you want to print and Click the Print Entire Chain icon on Top.
  11. The Browser will load the entire chain to print, then press the print button.

SMS-Backup-2

The same app allows you to Back-Up messages of WhatsApp too, so if you want to Print Whatsapp messages, just do the same as above.

How To Install Multiple ROMs on HTC One M8 with MultiROM v28

For an Android user, and by that means a person who purchased an Android device just because so he can use try different thing on his device, installing different ROMs is one of the best things ever, something that no other Platform has and if they have a chance to install Multiple ROMs on a single device, I don’t think a pure Android users, will let go of such opportunity. Multi-ROM v28 has been released and for those who don’t know what it is, we will tell you. Simply you can install a Single Primary OS on your device, no more than One, however, there are ways that you can crack that code and install more than one ROM on a Single device, however, you’ll be able to use one ROM at a time.

HTC One M8 is HTCs latest Flagship device and have enough potential to Run the Stock ROM without any problem or Lag, unlike Samsung. Multi-ROM is available for HTC One M8, means that you can install more than one ROM on it without any problem, and as I mentioned that it has more than enough power to run more than one ROM on it. However, you need to change a little things for it to install this Multi-ROM mod on it. If you are interested in Other ROMs, you can Visit our Custom ROMs section or you can install this MOD on your HTC One M8 by following our tutorial below. Remember, this is not a ROM, but only a MOD to let you install more than one ROM on HTC One M8.

HTC-One-M8

Early Preparations:

1. This is only for HTC One M8!

This custom ROM is only for the device mentioned above. Make sure that your model number matches the one listed above. To do so, go to Settings > About Device on your device and see your model number. Flashing this ROM on any other device will result in bricking it so make sure that you meet this requirement first of all.

2. Battery should be charged at least over 60%

Make sure that your battery is charged enough to complete the flashing process. In case your battery is low and your device goes dead during the flashing process, you may end up soft bricking your device as it won’t complete the flashing process.

3. Flash a Custom Recovery

A custom recovery, whether a TWRP or CWM is required to flash this ROM. You may find Philz Advanced CWM recovery on our site, make sure that you flash this one using the instructions explained in the guide.

4. Backup everything!

Just to be on the safe side, you may consider backing up each and everything from your Android device. This is highly recommended so that in case anything goes wrong, you still have the access to all of your data and you can restore it immediately. You may backup everything as listed below.

5. Disclaimer

The methods involved in flashing custom recoveries, roms and rooting your phone are highly custom and may result in bricking your device, and has nothing to do with Google or the device manufacturer that is HTC in our case. Also rooting your device will void its warranty and you will be no longer eligible for any kind of free device services by the manufacturers/warranty providers. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

Downloads Required:

 Modified TWRP Recovery: Link

Multi-ROM: Link

Modified Kernels: Link

How To Install Multi-ROM:

  • Make Sure that USB Debugging is enabled, go to Settings > Developers Option and Tick the USB debugging.
  • Make sure that Fastbboot/ADB is configured on PC. How? How to Install Android Adb & Fastboot Drivers on Your Windows PC [Guide].
  • Then Download the Recovery File and Kernel image from the above links.
  •  Copy and paste both the recovery.img and boot.img to the Fastboot Folder.
  • Turn off your phone and open Bootloader/Fastboot mode. How? Press and hole Volume Down + Power buttons until you see some text on screen.
  • Now Open Command prompt in Fastboot Folder, How? Hold Shift Key and Right Click anywhere in the Fastboot folder.
  • Now type in the following command: fastboot flash recovery recovery.img Press Enter.
  • Then type in the following command: fastboot reboot.
  • After the reboot, take out the battery and wait for at least 10 seconds.
  • Then re-insert the battery
  • Now Once again, enter bootloader mode.
  • Now in command Prompt type: fastboot flash boot boot.img
  • Once again, type: fastboot reboot
  • Now wait till it is properly booted up and GO back to Bootloader mode and Choose Recovery

TWRP Users.

  1. Tap On Back-Up and Select System and Data
  2. Swipe the Confirmation Slider
  3. Tap on Wipe Button and Select Cache.
  4. Swipe the Confirmation Slider.
  5. Go back to Main Menu and Tap Install Button.
  6. Locate the Multi-ROM.zip, Swipe the Slider To install it.
  7. Once the Installation is Over, you will be promoted to Reboot System Now
  8. Select Reboot Now to Reboot the System.

That’s it, now just wait for tutorials on installing Multi-ROMs on your HTC One M8

How To Root Verizon Galaxy S5 on Android 4.4.4 Kit-Kat Official Firmware

We have heard a bounty on the head of a Pirate or a wanted person, but we have never seen a bounty putting on the rooting of a Specific device. Verizon Galaxy S5 is the device whose rooting caused XDA developers to pay a lump sum of $18,000 to the developers of Towel Root, geohot, who successfully rooted this device. However, the case gets worst as the updates for Verizon Galaxy S5 keeps going on and on and users kept asking for the rooting method of these updates, which aroused even a bigger challenge for developers and the Android 4.4.4 Kit-Kat update failed to be rooted by the same old method. They somehow released the rooting method for NHA build, but the surprisingly release of NI2 build once again messed things up. In this article we will show you how to retain Root on NI2 build of Android 4.4.4 Kit-Kat.

Rooting allows you to get full control over your device, Stock apps and mods are good, but installing Custom Mods gives you better support and great battery life, you might need to delete some Stock apps from the device, a non-rooted device can’t do that, but a rooted one has the power to remove stock apps too.

Galaxy-S5-Verizon

But before we begin, Make sure that:

  1. Update Your Device To Android 4.4.4 Kit-Kat:Link
  2. That you have a Well Charged Battery, 60%-80% is better.
  3. Back-Up all your important ContactsCall Logs & Messages.It is highly recommended in case of any mishap or data loss to back up all your important data.
  4. Back-Up your Mobiles EFS DataHow To Restore and Back-Up EFS Data On Samsung Galaxy Devices.
  5. Check your device model, Go To Setting > About and Make sure that it is SM-G900V .
  6. Do-not try this tutorial on any other device
  7. Back-Up all Your apps: Link

Disclaimer:

The methods involved in flashing custom roms and rooting your phone is highly custom and may result in bricking your device,and has nothing to do with Google or the device manufacturers which is Samsung in our case. In case of any mishap we may not be held responsible. Follow these instructions to the letter to avoid any mishap or bricking. Make sure that whatever you do, you are doing it at your own responsibility.

How To Root The Device.

odin_explained6

  1. After updating your device to the OTA build, follow:
  2. Download Stock Kernel of Galaxy S5: Link
  3. Download Odin.
  4. Turn off your Phone and Turn it On While Pressing, Power + Volume Down + Home button until you see some text on-screen, Press Volume Up to continue.
  5. Make Sure that the USB drivers are installed.
  6. Open Odin in Computer and connect your device to PC, while it is in the Download mode.
  7. If your Phone is successfully connected to PC, the Odin port will turn Yellow with COM port number.
  8. Now Click on PDA and select the File ‘G900V_NCG_Stock_Kernel.tar.md5
  9. In Odin, Check Auto reboot  Option.
  10. Now Click the start button and wait for the process to complete.
  11. After the installation is complete you device will restart and once you see the Home Screen and get the “Pass” Message on Odin, unplug the cable
  12. Now Keep closing apps, until you are able to run Towel root app.
  13. Click Make in Rain button to root your device.
  14. Now Once again, Download NI2 Stock Kernel: Link
  15. Follow the above Odin steps to Flash it.
  16. Restart your device and Enjoy